THANK YOU for racing at Attitude Rc Raceway!
THANK YOU for racing at Attitude Rc Raceway!
-High voltage batteries are allowed, but you cannot exceed 8.44v
-If your battery exceeds 8.44v, it will be considered an infraction.
- IF YOUR ARE OVER 8.44 VOLTS, YOU ARE DQ'D FROM THAT RACE. IF IT IS FOR YOUR MAIN EVENT, YOU WILL BE DQ'D FROM THAT EVENT (O points)
-Battery temperature must NOT exceed or be below 5° the ambient temperature. There will be a battery in the shade by the tech table. This will be our official battery used for temperature.
*****ABSOLUTLY NO GYRO OR DRIVING DEVICE ALLOWED IN ANY CLASS**** (Except SR10)
TIRES- NO siping or grooving of any tires at any time!
AMATEUR CLASS
This was a brand new class for 2014 at Attitude RC Raceway. This class was designed for those that are new to the sport and just want to try it out, and get used to it. Go out there, have fun, and work on your set ups and fundamentals of dirt oval rc racing. There is no age limit on this class, BUT, if you start to show progression and improve, don’t be surprised if the Race Director moves you up to a regular class of racing. Haha Have fun and in this class.....EVERYONE IS A WINNER!!!
All cars must be Attitude Rc Raceway Slash Street Stock Legal (BL2 Motor/ESC allowed in the Amatuer class only.
(1) Have fun!
(2) Stock Traxxas radio and recievers ONLY.
(2) Traxxas XL5 Speed Control in 50% mode. This is to slow our Amateurs down, so they can run smooth laps and learn more of the fundamentals of racing.
(3) MUST run 86/19 gearing with the 12T Titan motor. (86/24 if you run the BL2 Motor)
(4) If you run a truck body, you must add 8oz of total weight to your truck. You must put 4oz on each side of your battery on the chassis plate. Please make sure the weight is easily removable for inspection purposes.
(5) Anyone is welcome to come race with us at Attitude Rc Raceway and try out the fun hobby of rc racing with what you have, but if you run this class more than 4 weeks, you MUST comply with the 2024 Rules
Sprint Car
This class is for the Sprint Car enthusiast who wanted to come out and try the progressive banked dirt oval!
(1) Any 13.5 Brushless Motor
(2) ESC must be in blinky sportsman mode, no timing advance
(3) Any 6 cell or 2s 7.4v / 7.6v Lipo. VOLTAGE MAY NOT EXCEED 8.44 VOLTS
(4) No metal bumpers or body parts allowed
(5) DE Outlaw Sprint Tires ONLY (Any Compound)
(6) DODC small OR big top wing allowed. (6x6) or (7x7)
(7) Front wing is optional to run
(8) Must have scale appearing cage, hood, side panels, fuel cell, nerf bars and front and rear bumpers. All cage and body components such as cage, bumpers, nerf bars, hoods, side panels, tanks, etc. must be mounted on the centerline of the cage. Chassis may not extend outside of the side panels by more than 1/4" on either side. All electronics, radio gear, fuel tanks, transmissions and gears must be positioned inside the cage side frames.
(9) All DODC Rules apply
Midwest Sport Mod
The new Midwest Sport Mod class was a new class for the 2016 season! This class was developed by the racers who previously ran the old Street Stock Class. This class was designed to keep the competition as close as possible while keeping the cost of the vehicle at a minimum. This means anyone can go out and buy a used or new 2wd buggy, add a Midwest Modified body, do minimum changes to it and bring it out to Attitude RC Raceway and be competitive and most importantly have a ton of fun!
(1) Must be a mass produced 2wd off-road buggy
(2) Must have functional gear box
(3) No direct drive style differentials
(4) Rear Motor or Mid Motor
(5) Stock Buggy Suspension, USING ALL STOCK MOUNTING HOLES AND PARTS MUST BE IN STOCK LOCATION.
(6)Stock buggy style shocks. 1/10th Scale springs. Shock oil may be changed
(7) Rear Toe allowed
(8) Adjustable Arms allowed but you still need to abide by rear toe rules!
(9)Stock shock mounting holes must be used
(10) No altering mounting holes of any kind.
(11)Any DODOC “style” Midwest Modified Body. These are bodies from, Sippel Speed Shop, Bodies By Ed, ect.
(12) Rear Wheel openings must be cut to a minimum of diameter of the appropriate tire. (12) DE Mini G6T Tires ONLY! (Any compound is legal
(13) Up to 7 Cell Nimh or 2s 7.4v / 7.6V Lipo (VOLTAGE MAY NOT EXCEED 8.44 VOLTS)
(14) Battery Must run in stock location.
(15) 17.5 Brushless Motors
(16)ESC must be in blinky sportsman mode, no timing advance
(17) Spoiler max length: 1.5". Spoiler cannot be wider than center panel. - No more than (2) spoiler center braces allowed. Center braces can be no larger than optional spoiler end caps. - End Caps cannot extend past end of Side Panel. - End Cap Size: Length 2.75" Height 1.5". Height is area of End Cap above the rear deck.
This class was designed to keep it simple and cheap, but yet provide some fun and exciting Slash Short Course Dirt Oval Racing!!!
Must use stock Traxxas Slash 2wd chassis and components, unmodified, unless otherwise specified. No modifying, replacing, or removing any components unless otherwise specified.
All suspension components must be installed in the proper position and orientation on the car from the factory (EXAMPLE: Left caster block on the left; right block on the right, suspension arms right side up, etc.).
Any color Traxxas Slash aluminum steering bell cranks (#3743), caster blocks (#3632), steering blocks (#3636), camber links, and rear axle carriers (#3652) are allowed
RPM rear carriers (#80382), front steering blocks (#80372), caster blocks (#80712), and front (#80952, #80953, #80955) & rear (#81002, #81003, #81005) bumpers will be allowed. Must run the Traxxas 2wd Slash rear bumper. (Stock or RPM) The "hoop" and "ears" on the front bumper may be cut off; however, the main area of the bumper must remain intact (unless you are running a body manufactures front body mount/bumper.
Transmitter/Receiver and servo may be replaced. (Servo saver will also not be a tech item) Traxxas Aluminum Steering Bellcranks (3743A and 3743X)
Locking or modifying the differential in any way will not be allowed. The differential must have normal diff action when rotating one rear tire against the normal compression (resistance) of the motor. No ball diffs.
Max Gear Rule
You can run any Traxxas 2wd Spur gear, but will be limited to how big your pinion gear can be. Listed below are the biggest pinions you can run with each spur gear.
90/22 - 11.13
86/21 - 11.14
83/20 - 11.29
78/19 - 11.17
NO SWAY BARS
No additional weight may be added. The ESC, transponder, and receiver can be mounted anywhere in the main chassis plate area only.
Minimum Ride Height: .750" (including body).
Motor, ESC, & Battery: Must use the stock XL-5 ESC (unaltered) & unaltered Titan 12t 550 brushed motor. Tuning, tweaking, or modifying the motor in any way will not be allowed. The stock (bullet) connectors from the motor to the ESC must also be used. Soldering the connectors together is not allowed. No cooling fans on the motor or esc.
Battery: Max charge of 8.44V, Stick Pack Only and hard case only.
Battery must be mounted in the stock center tray location, but can be moved forward or back as long as it stays within the stock boundaries of the battery tray. Any plug may be used for the battery to ESC connection. However, direct soldering to the battery will not be allowed.
MOTOR CLAIM/SWAP
-If you qualify into the a-main, you will be allowed to claim another A-main competitor’s motor.
-You are allowed to claim a motor ONE TIME ONLY, IN THE 2025 SUMMER RACING SERIES
-If you “CLAIM” a motor, you must have a BRAND NEW IN A SEALED PACKAGE MOTOR to “SWAP” with the one being claimed. This claim/swap must be mentioned within 2 minutes of the completion of the race, and you need to have the NIP Motor with you.
-Each Claim/Swap will happen at the end of the race day. In the event of a claim/swap, both competitors’ cars will be impounded with the NIP motor until the end of the race day when the techs will have time to witness the claim/swap happen between competitors.
-The racer being claimed, has the option to “DECLINE” the claim/swap, but will then forfeit all possible trophies, prize money and points for the day. This will not be allowed to be used as a “drop day” and 0 points will be counted towards the 2025 point system
-This rule is not meant to start grudges but is a tool to keep racers honest and motors stock the way they should be. The Attitude RC Raceway tech staff or Race Director can REJECT a motor claim/swap at any time.
Tires, Wheels, & Inserts: Any Stock Traxxas 2wd Slash Wheel and Tire is Allowed Must use stock Traxxas Slash tires and Stock 2wd Traxxas Slash Wheels ONLY. Choice of: Slash Spec, Kumho Venture, and BF Goodrich treads. Front wheels must be on the front and rear wheels on the rears. 19mm offset Front 21.5mm offset rear. Each wheel must have a minimum of two vent holes, and must be stamped with the offset label. Altering the inside of the tire in any way will not be allowed. However, gluing or taping the outside of the tire to help prevent traction rolling will be allowed. -Tires cannot be ground down to slicks.. -One foam insert per tire only.
Shocks & Springs: Any Slash tuning spring by Traxxas will be allowed. Springs may not be cut or altered from factory in any way. Aluminum shock caps (any color) are allowed. The shock oil or shock travel/length will not be mandated. 2-stage pistons or any modification to the shock piston to tune the compression and rebound separately will not be allowed.
If it doesn’t state that you can use or do it to the car it’s NOT ALLOWED!
-Traxxas LCG chassis kit is legal. -RPM Transmission case is NOT allowed -Approved part list: RPM-80712, 80832, 80852, 81002, 81003, 81005, 80902, 80905, 80372, 80382, 80244, 80249, 80599, 73752, 80592, 80595, 80594 -All Brands of Aluminum shock caps that fit on the stock shocks STRC- ST3640S, ST3640BK.
-All parts that Traxxas make for the 2wd electric slash are allowed.
Bodies:
Dirt Oval Street Stock Style Body allowed. Absolutely NO drag bodies converted over to a dirt oval body. Short Course Street Stock Dirt Oval bodies ONLY.
-Decking is allowed
-------- DECK-------
-1” Max Deck Rake
------ROOF-------
.5” Max Roof Rake measured from the deck
------Spoiler-------
-Total length of spoiler from deck to top of spoiler may NOT exceed 1". Spoiler must resemble a full scale dirt oval spoiler. No wicker style spoilers out the back of the car.
-Spoiler to be no wider than the sides of the body
-Factory cut lines MUST be used. Absolutely NO altering fenders, hoods, deck height, roof or deck rake, ect.
SHORT COURSE LATE MODEL
True dirt oval racing at an affordable price, this is one of our largest classes, join the fun and see why it’s so popular.
(1) Any mass produced 2WD Off-road Short Course Truck chassis
- Stock Short Course Truck Suspension. (USING ALL STOCK MOUNTING HOLES AND PARTS MUST BE IN STOCK LOCATION)
-Short course truck style shocks. Shock oil may be changed, 1/10th scale springs
- Stock shock mounting holes must be used - No altering mounting holes of any kind
-Wheelbase must remain the same on both sides
- Stock factory toe blocks
-Rear toe allowed
- No direct drive style differentials. Slipper Eliminators are allowed
(2) Must have one piece lexan short course late model body, or multi piece MR/Kustoms body as this body's specs have been passed at Attitude Rc Raceway
(3) Only Pro-Line Street Fighter Tires, Dynamite Robber tires, Duratrax bandito, Duratrax Bandito SC-M Tires, Louise Rocket, DE Racing Ungrooved G6T tires, and Proline Hoosier tires allowed.
(4) 13.5 Brushless motor ONLY
(5) Aftermarket ESC must be in “blinky” sportsman mode, no timing advance
(6) Any 6 cell, 7 cell Nimh or 2s 7.6V Lipo (VOLTAGE MAY NOT EXCEED 8.44 VOLTS)Lipo
(7) Batteries must be in stock location.
(8) No metal bumpers or body parts allowed
(9) Spoiler no bigger than 3” and no wider than the body, and must be 1 piece
(10) Side boards / end caps, should be no taller than 3" off the deck in back and no taller than 1 1/4 in the front. A 3rd side board is allowed
Here are the rules for the Amatuer Traxxas Slash Modified class. If you previously ran in the Attitude Rc Raceway Amateur SC BMod class, your car will be grandfathered into this class for 2025 only.
Body
• Traxxas Slash Modified body ONLY (Model #10411)
• No aftermarket bodies
• Replacement Traxxas Modified body allowed
• (**) Body may be trimmed around wheels to prevent rubbing
4. Bumpers
• Traxxas Slash Modified ONLY
• Front and Rear must be used as they are installed from the factory
• NO AFTERMARKET PARTS (Front body mount to help nose of the body stay attached is approved.)
5. Chassis Components
• Traxxas Slash Modified ONLY
• LCG only (stock Traxxas Slash Modified Low center gravity chassis only
• No modifications to the chassis or transmission case,
• Must remain stock no cutting or drilling of parts
• Must have Stock Traxxas Slash Modified parts
• Parts must be installed the same way as Factory
• All factory adjustments mounting locations may be used
• No cutting of parts
6. Steering components
• Traxxas Slash Modified ONLY
7. Electronics mounting locations
• Must be mounted in factory Slash Modified locations
8. Suspension
• MUST BE Traxxas Slash Modified ONLY. You may tune with any of the Traxxas springs designed specifically for these shocks.
• Shock Limitors are NOT allowed
• Shocks may be adjusted with the factory threaded adjusters
• (**) ANY WEIGHT SHOCK OIL MAY BE USED
9. Motor & ESC
• Stock BL-2s Motor & BL-2s ESC COMBO ONLY
10. Transmission
• MUST BE STOCK Traxxas Slash Modified Transmission
• MUST HAVE Stock Slash Modified internal components.
• (**) ANY DIFF OIL MAY BE USED
• (**) REMOVAL OF THE GREASE AND DIFF OIL IS ALLOWED
•(**) 86/21 GEARING (Yes we are gearing them down a bit from stock)
11. Slipper Clutch
• Stock slipper clutch and components must be used
12. Radio & Receiver
• Stock Traxxas Slash Modified TQ radio and receiver ONLY
13. Servo
• Must be stock Traxxas Slash Modified
14. Battery
• (**) Any battery connectors may be used
• Stock battery brace must be used
15. Rims & Tires
• Factory Traxxas Slash Modified Tire and Rim combo OR the DE Racing G6T Tires (non grooved only) Allowed on any wheel that matches the stock Traxxas modified offsets. No sanding,grinding,or altering the tread pattern allowed. Tires must have visible tread all the way accross the tire.
• Traction Compound Allowed
If its not approved in these rules then its not legal.
SHORT COURSE B-MODIFIED
This has been one of our biggest classes with around 20 cars showing up each race day! Tight racing is what you will find in this exciting class.
(1) Any Mass Produced 2WD Off-road Short Course Truck chassis - Stock Short Course Truck Suspension. (USING ALL STOCK MOUNTING HOLES AND PARTS MUST BE IN STOCK LOCATION)
- Short course truck style shocks. Shock oil may be changed - Stock shock mounting holes must be used
- No altering mounting holes of any kind.
- Stock factory toe blocks
-Rear toe allowed
- No direct drive style differentials. Slipper Eliminators are allowed
- Must have a SC Modified Style body, similar to a Sippel Speed Shop, BBE, Impressive Race Bodies, MR/Kustoms body, ect
BODY DIMENSIONS:
- 13” Max Width
- 28” Max Length
- 7.5” max body height measured from bottom of chassis
--------CENTER DECK-------
-1” Max Deck Rake
-1” Max Center Deck taper (widest point of the deck can only be 1” wider than the narrowest point of the deck)
--------SPOILER-----
-1.5” Max Spoiler Height
-Spoiler End Plate Max 2” high off the center deck and 3.25” long
------ROOF-------
.5” Max Roof Rake measured from the deck
9” Max Roof Width
9” Max Roof Length
No Roof Spoilers, a bend down at the trailing edge of the roof is allowed for strength
Roof Side Rails allowed but must have a scale appearance and be on both the left and right sides of the roof
¼” Bend down at the leading edge of the roof allowed
-------- ROLL CAGE/ROOF SUPPORTS-------
Roll cage/roof supports must be cut or formed to resemble a roll cage. No solid panel roof supports. Window netting and rock guards are allowed
-------NOSE------
Nose Sides can extend a max of ¼” above the plane of the nose panel
Nose Sides can extend a max of ¼” above the plane of the hood panel
Nose cannot extend past the inner edges of the front wheels
Main nose panel must be a flat plane. No concaved or scooped noses allowed
Rear Wheel well must be cut out to expose the whole rear wheel/tire
Left and right windows and sails can be open as long as both sides are the same
- Only Pro-Line Street Fighter Tires, Dynamite Robber tires, and Duratrax bandito, Duratrax Bandito SC-M Tires, Louise Rocket, De Racing ungrooved G6T tires, and Proline Hoosier tires allowed
- 17.5 brushless motors only
- ESC must be in blinky sportsman mode, no timing advance
- Any 6 cell, 7 cell Nimh or 2s 7.4v or 7.6V Lipo (VOLTAGE MAY NOT EXCEED 8.44 VOLTS) -Batteries must be in stock location.
This will be a PARTIME class in 2025.
(1) Stock Reedy 3300kv Brushless Motor and ESC ESC
(2) ESC must be in blinky sportsman mode, no timing advance
(3) Any 6 cell or 2s 7.4v / 7.6v Lipo. VOLTAGE MAY NOT EXCEED 8.44 VOLTS
(4) DE Mini G6t OR Stock Sr10 Buggy Tires ONLY (Any Compound)
(5) Chassis and Suspension / All Suspension parts MUST remain STOCK. (Changing shock oil is permitted)
(6) You may upgrade radio and recievers. Gyros are allowed with stock radio and recievers ONLY.
(7) APPROVED List of Bodies (Windows must remain in, on ALL bodies)
-Stock SR10 Body
-MR/Kustoms CirKuit
-Shark Rc Bodies Dawg Pound
-Mcallister Monte Carlo
(8) 1/2" Spoiler is allowed if it's not molded in.
(9) Box Stock Gearing Only! This PARTIME class will be added in 2024.
(1) Stock Reedy 3300kv Brushless Motor and ESC
(2) ESC must be in blinky sportsman mode, no timing advance
(3) Any 6 cell or 2s 7.4v / 7.6v Lipo. VOLTAGE MAY NOT EXCEED 8.44 VOLTS
(4) DE Mini G6t OR Stock Sr10 Buggy Tires ONLY (Any Compound)
(5) Chassis and Suspension / All Suspension parts MUST remain STOCK. (Changing shock oil is permitted)
(6) You may upgrade radio and recievers. Gyros are allowed with stock radio and recievers ONLY.
(7) APPROVED List of Bodies (Windows must remain in, on ALL bodies)
-Stock SR10 Body
-MR/Kustoms CirKuit
-Shark Rc Bodies Dawg Pound
-Mcallister Monte Carlo
(8) 1/2" Spoiler is allowed if it's not molded in.
(9) Box Stock Gearing Only!
This PARTIME class was added in 2015 and will be back by popular demand in 2025!! This class was created and designed to RACE NOT BASH!!
-For a full set of rules, see the Slash Street Stock Rules
1. Any full-sized body is legal (Encouraged to run a body that looks close to the real World Figure 8 cars)
2. No large wings or air flow control devices Side panels similar to the World figure 8 cars is permitted. (12" MAX in height, measured from the ground. Please make sure the top of the side Dams are rounded for safety reasons!
3. Recommended bodies are any Slash Street Stock body, truck body, or oval late model body.
4. Front wheel fenders must be trimmed back away from the front wheels when running a dirt late model style body or wedged nose.(This is to prevent wedging other cars out of the way, which typically results in a flipped car). Think of the marshals on this one!
-In 2015 we implemented rules throughout the year to keep it more of a race instead of a bash session. We have been successful with these “X” rules and will be implemented once again in 2022.
-The “X” Rule will be off of the race directors discretion. Bottom line is, if you wreck while in the process of going through the “X” and land on your side or top, the corner marshal will pull your vehicle from the race and you are out.
This class will be raced twice in 2025 and will replace the SR10 Hobby Stock class in 2026.
The Buggy Street Stocks will race on Friday night, August 15th & Friday night September 26th.
Any mass produced 1/10th scale off-road 2wd buggy. Associated SR-10 Allowed to race with the buggy street stocks in 2025. In 2026 the SR10 Hobby stocks will have to change electronics to comply.
Chassis must remain stock, no aftermarket/non-oem upgrades except RPM Brand parts desinged for the chassis.
Must use OEM parts mounted with OEM mounting holes. No mixing of brands.
No adjustable arms
No sway bars
Big Bore and threaded OEM Shocks are allowed.
SPRINGS: They can be from any manufacturer in the RC Industry not only OEM.
Weights neeed to be mounted within the front and rear shock towers and within the chassis plate.
Motor: 17.5 Hobbywing Justock
ESC: Hobbywing 60amp Justock
DE Mini G6t Tires
1/10 scale street stock appearing bodies
Body may be decked
Max 1” Spoiler measured from the deck. No End caps allowed.
Body must include rear bumper cover.
This class is new for 2024. This class will be ran as one event per race day. This event will be the very last race of the day. Thank you to Fast Eddie's and Salvage, we will run a points series with this and the top 5 in points will be awarded at the end of the 2024 season. This class is new for 2024. This class will be ran as one event per race day. This event will be the very last race of the day. Thank you to Fast Eddie's and Salvage, we will run a points series with this and the top 5 in points will be awarded at the end of the 2024 season.
(1) Attitude Rc Raceway Slash Street Stock chassis rules
(2) No body rule. They must remain lecan bodies. (Have Fun!)
(3) Figure 8 Tap Out Rule
EVENTS
Figure 8 Race
Double O Race
Trailer Race
Flag Pole Race
Toll Booth Race
2nd to win
Team Cruisers
Open motor
Open ESC
Open Tires
DODC rules Apply
Copyright © 2018 Attitude Rc Raceway - All Rights Reserved.
Powered by GoDaddy